Installation Sheet (1:1 DWG) (Model Pro)

Model Pro 500/700 Download 1:1 DWG (ENG notes) Stiahnuť 1:1 DWG (SVK notes) Download PDF (ENG notes) Stiahnuť PDF (SVK notes) Model Pro 600/800 Download 1:1 DWG (ENG notes) Stiahnuť 1:1 DWG (SVK notes) Download PDF (ENG notes) Stiahnuť PDF (SVK notes) Model Pro Chair (Standalone) Download 1:1 DWG (ENG notes) Download PDF (ENG notes)

Water proportional valve – TB_PREM

Instrument cooling water flow is controlled using a servo drive connected via 3 wires to TB_PREM (Model Pro). The valve can be switched ON/OFF in Dental unit management of the dental unit. If the water servo drive is disabled in the menu, water amount adjustment for instruments will be disabled (grayed out). The valve is […]

Wiring diagrams (Model Pro)

Download all wiring diagrams 09/2022 (.zip) CONTROL PANEL CB_PREM, USB TB_PREM DENSIM micro motors – DX, DX PRO, DX SRG Turbines, Proportional valves for Air and Water, Pneumatic brake Syringes, Syringe hygiene Valve, Boiler, Peristaltic Pump EMS 286, 367, 433, 432, Woodpecker N3 Satelec 4055, Xinetic, LM ProPower Satelec Newtron, NSK VA170 PLM Mectron, Monitex […]

Metasys WEK

The METASYS water decontamination system (WEK) is a system which enables decontamination of the water supply and pipes using the special disinfectant GREEN&CLEAN WK. In addition to its primary water decontamination function, the WEK also has a cascade (with DVGW-registration) to guarantee the separation of decontaminated water from tap water. Treated water is used throughout […]

CONNECT app versions

Current version iOS – v1.5.0 Release date: 04 July 2022 added support for automatic cup filling added support for upcoming 2-way foot controller added screen to display the amount of solution left in individual bottles added ENDO mode for Woodpecker USS added interface languages – Romanian, Swedish improved representation of slow-gear handpiece torque value – […]

Firmware versions (Model Pro)

1.1.20 Release date: 03.11.2023 Modules versions CB_PREM 1.0.0.36 TB_PREM 1.0.0.28 SB_PREM 1.0.0.24 FC_PREM 1.0.0.13 FCRX_PREM 1.0.0.8 AB_PREM 1.0.0.7 FCRF_PREM 1.0.0.13 CHB_PREM_CHES 1.0.1.10 CSB_PREM 1.0.0.3 Improvements: Added option for end-user chair calibration Improved chair calibration diagnostics Improved EEPROM protection SWING foot control implemented for SRG micro motor (bugfix) Wireless foot control battery discharging quickly while the […]

Does MODEL PRO need to be anchored?

There are 2 versions of MODEL PRO: Convertible unit Convertible unit always needs to be anchored to the floor to achieve maximum stability and safety Non-convertible unit Non-convertible unit can be ordered in 2 versions: anchored – this unit needs to be anchored to the floor as the base of the chair is shorter and […]

Tablet requirements for MODEL PRO

There are following requirements on the tablet for running the CONNECT app: screen size 7″- 10″ iOS or Android powered Bluetooth v4.2 and higher Minimum screen size is 7″, if the screen is any smaller, the app will not draw the interface correctly. Maximum size is 10″ becasue the holder on the dentist’s panel is […]