Water proportional valve – TB_PREM

Instrument cooling water flow is controlled using a servo drive connected via 3 wires to TB_PREM (Model Pro). The valve can be switched ON/OFF in Dental unit management of the dental unit. If the water servo drive is disabled in the menu, water amount adjustment for instruments will be disabled (grayed out). The valve is […]

Wiring diagrams (Model Pro)

Download all wiring diagrams 09/2021 (.zip) CONTROL PANEL CB_PREM, USB TB_PREM DENSIM micro motors – DX, DX PRO, DX SRG Turbines, Proportional valves for Air and Water, Pneumatic brake Syringes, Syringe hygiene Valve, Boiler, Peristaltic Pump EMS 286, 367, 433, 432, Woodpecker N3 Satelec 4055, Xinetic, LM ProPower Satelec Newtron, NSK VA170 PLM Mectron, Monitex […]

Metasys WEK

The METASYS water decontamination system (WEK) is a system which enables decontamination of the water supply and pipes using the special disinfectant GREEN&CLEAN WK. In addition to its primary water decontamination function, the WEK also has a cascade (with DVGW-registration) to guarantee the separation of decontaminated water from tap water. Treated water is used throughout […]

CONNECT app versions

iOS – v1.4.0 Release date: 23 July 2021 added user option to select instrument light to be lit at instrument start or right after picking up from the dentist’s panel added new languages and correction of some existing ones some technical notifications have been removed some buttons have been removed from the FW update screen […]

Firmware versions (Model Pro)

1.0.8 Release date: 13.08.2021 Modules versions CB_PREM TB_PREM SB_PREM FC_PREM FCRF_PREM FCRX_PREM AB_PREM CHB_PREM_2H CHB_PREM_CHES Improvements adjustment to water servo drive control distilled water bottle is now depresurized for top-up when Alpron bottle is empty (with DIPLOMAT hygiene) some messages are now displayed for short period […]

Does MODEL PRO need to be anchored?

There are 2 versions of MODEL PRO: Convertible unit Convertible unit always needs to be anchored to the floor to achieve maximum stability and safety Non-convertible unit Non-convertible unit can be ordered in 2 versions: anchored – this unit needs to be anchored to the floor as the base of the chair is shorter and […]

Tablet requirements for MODEL PRO

There are following requirements on the tablet for running the CONNECT app: screen size 7″- 10″ iOS or Android powered Bluetooth v4.2 and higher Minimum screen size is 7″, if the screen is any smaller, the app will not draw the interface correctly. Maximum size is 10″ becasue the holder on the dentist’s panel is […]

Why is there a USB port on MODEL PRO?

The USB port located on the underside of dentist’s panel on MODEL PRO is dedicated for charging devices. The output power is 5W and is sufficient to keep the device charged throught the shift. There is no option to transfer data via the USB port. Bluetooth connection is used for transfering data from the tablet […]