Service Manual (Model Pro)
Model Pro 500/700 Latest version Stiahnuť Download Model Pro 600/800 Latest version Download
Metasys WEK
The METASYS water decontamination system (WEK) is a system which enables decontamination of the water supply and pipes using the special disinfectant GREEN&CLEAN WK. In addition to its primary water decontamination function, the WEK also has a cascade (with DVGW-registration) to guarantee the separation of decontaminated water from tap water. Treated water is used throughout […]
CONNECT app versions
Current version iOS – v1.5.0 Release date: 04 July 2022 added support for automatic cup filling added support for upcoming 2-way foot controller added screen to display the amount of solution left in individual bottles added ENDO mode for Woodpecker USS added interface languages – Romanian, Swedish improved representation of slow-gear handpiece torque value – […]
Firmware versions (Model Pro)
1.1.20 Release date: 03.11.2023 Modules versions CB_PREM 1.0.0.36 TB_PREM 1.0.0.28 SB_PREM 1.0.0.24 FC_PREM 1.0.0.13 FCRX_PREM 1.0.0.8 AB_PREM 1.0.0.7 FCRF_PREM 1.0.0.13 CHB_PREM_CHES 1.0.1.10 CSB_PREM 1.0.0.3 Improvements: Added option for end-user chair calibration Improved chair calibration diagnostics Improved EEPROM protection SWING foot control implemented for SRG micro motor (bugfix) Wireless foot control battery discharging quickly while the […]
Does MODEL PRO need to be anchored?
There are 2 versions of MODEL PRO: Convertible unit Convertible unit always needs to be anchored to the floor to achieve maximum stability and safety Non-convertible unit Non-convertible unit can be ordered in 2 versions: anchored – this unit needs to be anchored to the floor as the base of the chair is shorter and […]
Tablet requirements for MODEL PRO
There are following requirements on the tablet for running the CONNECT app: screen size 7″- 10″ iOS or Android powered Bluetooth v4.2 and higher Minimum screen size is 7″, if the screen is any smaller, the app will not draw the interface correctly. Maximum size is 10″ becasue the holder on the dentist’s panel is […]
Why is there a USB port on MODEL PRO?
The USB port located on the underside of dentist’s panel on MODEL PRO is dedicated for charging devices. The output power is 5W and is sufficient to keep the device charged throught the shift. There is no option to transfer data via the USB port. Bluetooth connection is used for transfering data from the tablet […]